Sales of manual Barrier Gates and Parking Gates manufactured by Upswung LLC

Sales of Manual Barrier Gates and Barrier Gate with gates barriers, barrier gate arm, barrier gate operator, gate bridge barrier, gates and barriers,
barrier gate operators, gate barriers, barrier gate system, automatic barrier gate, parking barrier gate,safety barrier gate, security barrier gate
and barrier gate arms for commercial use.

Upswung Parking Systems Corp.
Why Buy from Upswung? Partner Links

Automatic gates, Electric gates, gate openers
Contractors License NV. #57900  CA #363787 since 1978
Phone Hours (PST) 775-588-1475     Fax 775-588-1473
7:30 to 4:00 Mon.- Fri.

Home Page

Manual Barrier
6 to12 feet

Manual Barrier
8 to 18 feet

Manual Barrier
8 to 32 feet

Electric Barriers
to 20 ft with fence

Electric Barriers
36 to 42 feet

Barrier Gates

Barrier Operators

Solar Powered Barrier Gate

Automatic Bollards

BL-52
Industrial Gate Operator

ANTI-CORROSION PROTECTION:

INTERNAL MECHANICAL PARTS
Protected by yellow electro zinc dichromate thickness: 22 µm.

CABINET HOUSING
Special research has been conducted on the anti-corrosion treatment of the cabinet to ensure resistance to the most severe environmental conditions. The entire course of treatment is as follows:
1. Removal of grease from the metal parts,

2. Rinsing in water to eliminate all alkaline residue,

3. Zinc phosphatization: thickness 5 µm,

4. Passivation, ensuring an increase in the corrosive resistance of the coat of phosphate obtained,

5. Elimination of residual salts (ions), through rinsing with de-mineralised water,

6. Final treatment by cataphoresis, thickness: maximum of 22 µm. (Cathodic process).

FINISH:

ANTI-CORROSION PAINT
(1) coat of primer paint, (2) component epoxy micacious iron ore, thickness: 40 µm.
FINISH COAT
(1) coat of (2) component polyurethane paint, thickness: 40 µm.
Standard color: Orange (RAL 2000).

TECHNICAL CHARACTERISTICS:

·MCBF: 6 million cycles. (Normal maintenance required).
·Certified NBN EN ISO 9001.

Barrier arm (Boom):	3-piece heavy-duty round extruded aluminum interlocking tubes. (4mm, 6 gauge) thick. White enamel finish with red reflecting stripes.
Barrier arm length:	7m to 13m - 24ft to 42ft. Boom mounting: position is central. Arm off-set to left or right-hand side to facilitate a folding skirt, optional. Position of the barrier arm: central. Off-set left or right for skirting is optional
Tip Support:	adjustable height. Electromechanically locking is optional. (See Tip Support data sheet).
Heavy-duty HD Clutch.
Motor:	1/2HP AC 0.25 KW - 960 RPM.
Power supply:	120/208V 1 or 3-phase 60Hz.
Power Consumption:	Stand-by = 120 W. In operation = 420 W. Heater: 80W.
Gearbox:	Speed reduction type: VF110/A ratio of 100:1.
Motor pulley:	Diameter 40 mm (in 60 Hz).
Gearbox pulley:	boom lengths: <11 m boom length = 150 mm diameter pulley. >11 m boom length = 180 mm diameter pulley:
Trapezoidal V-belt:	boom lengths: <11 m boom length = M28.5. >11 m boom lenght = M29.5.
Balancing springs for barrier arm:	Compression springs. 91x735mm diameter-21 turns; wire diameter - 20mm.
Net weight:	365Kg to 385Kg, (800lbs to 850lbs.) with barrier arm.
Operation temperatures:	-25°C to +70° C -13°F to +158°F.
Bracing wires and adjustable stretchers:	Stainless steel. 2 to 4 required depending on boom length.

Copyright © 2005-2009 Parking Systems Corp® All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronically without the prior written consent of Upswung Parking Systems Corp®.