|
|
BL-52
Barrier Gate
Parking Systems and Vehicle Access Control,
Public Transportation, and Gates for Toll & Traffic Management. Designed for
system modularity with maximum flexibility, ease of operation and maintenance;
Automatic Systems’ equipment responds to a wide range of facility requirements
while remaining very cost effective.
Call 775-588-1475 for
detailed information and site planning service.
|
BL-52
Industrial Barrier Gate Operator
|
|
|
|
|
INDUSTRIAL GATE OPERATOR
The Model BL52 Industrial Gate
Operator is designed and manufactured by Automatic
Systems. The BL52 is typically utilized for medium
traffic volumes and wide access point management. It is
designed to stand up to the harshest weather
environments and operating conditions.
The BL52 is most often utilized for multiple lane
protection. Common applications include: Bridge and
Tunnel access; commercial/industrial garages and
warehouses, etc. The BL52 is capable of utilizing
heavy-duty barrier arms (Booms) to a maximum of 46 feet,
and can fully open in 8 to 12 seconds.
|
|
SAFETY:
1. Completed Cycle
Locking: Barrier arm mechanically locked
in the fully completed 90º vertical up
position, and in the completed
horizontal down position.
2. HD Clutch: Dual
Friction Disk: Torque limiter
(Heavy-duty), which protects the
electromechanical drive system, as well
as both vehicles and pedestrians.
3. Emergency Crank
with safety circuit.
4. Barrier arm
safety sensor system. (See options).
5. Power Failure:
System will shut off and the clutch will
maintain the barrier arm in its current
position.
|
|
|
|
|
|
·Mechanical endurance
(MCBF): 1 million cycles. (Normal maintenance
required).
·Certified NBN EN ISO 9001.
|
·MCBF: 6 million
cycles. (Normal maintenance required).
·Certified NBN EN ISO 9001.
|
|
|
|
Barrier arm (Boom): |
3-piece heavy-duty round
extruded aluminum interlocking
tubes. (4mm, 6 gauge) thick.
White enamel finish with red
reflecting stripes. |
|
Barrier arm length: |
8m to 14m - 26.3ft to 46ft.
Boom mounting:
position is central. Arm off-set
to left or right-hand side to
facilitate a folding skirt,
optional.
Position of the barrier arm:
central. Off-set left or right
for skirting is optional |
|
Tip Support: |
adjustable height.
Electromechanically locking is
optional. (See Tip Support data
sheet). |
|
Heavy-duty HD Clutch. |
|
|
Motor: |
1/2 HP AC - 1625 RPM. |
|
Power supply: |
120V 1-phase 60Hz. |
|
Power Consumption: |
Stand-by = 175 W.
In operation = 738 W.
Heater: 125W.
|
|
Gearbox: |
Speed reduction type: VF110/A
ratio of 100:1. |
|
Net weight: |
365Kg to 385Kg, (800lbs to
850lbs.) with barrier arm. |
|
Operation temperatures: |
-25°C to +70° C (-13°F to
+158°F). |
|
Bracing wires and adjustable
stretchers: |
Stainless steel. 2 to 4 required
depending on boom length. |
|
|
|
OPTIONS:
· Barrier Arms: Boom is a
3-piece aluminum tube. (8m to 14m, 26.3 to 46
feet) in length.
· Boom mounting position is
central. Arm off-set to left or right-hand side
to facilitate a folding skirt, optional.
· Rigid aluminum folding
lower skirt.
· Alternate red and white
plastic link folding skirt.
· Barrier arm safety
pressure switch. (Mounted on lead bottom edge).
· Barrier arm safety sensor
system. (Two types available, please consult).
· Barrier arm tip support.
(Electromagnetically locked tip support,
optional).
· Barrier arm lighting.
(Spacing: one light approximately every 3 feet).
· Flashing relay for arm
lighting.
· Barrier arm signage.
(Please consult).
· Ceramic heater for extreme
cold.
· Cabinet colors other than
the standard orange.
· Installation template
steel base frame.
·
Note: Adding optional
attachments to the Barrier arm increases weight,
therefore decreasing the maximum available
Barrier arm length.
|
|
|
CONTROLLER OPTIONS:
· Operated via a 3-push
button box (open-stop-close), or automatic
closing with loop detector.
· Automatic opening of a
barrier with one way traffic.
· Automatic opening in one
direction of a bi-directional barrier.
· “Direction Detection”,
which is the automatic closing of the barrier in
both directions and or automatic opening in one
single direction.
· Virtually unlimited
control options.
· Built in “Vehicle
Counters”.
· Actuation devices, such as
push buttons, card reader, ticket dispenser,
token or coin acceptors, vehicle presence
detector + detection loop, etc., for opening or
closing of gate.
|
|
|
BL52 BASE
CONFIGURATION |
CODE |
Type |
|
COMMENTS |
|
BL52 |
CENTRAL ROUND ARM |
6 m
[19' 8''] |
EX1909/056 |
S |
$11,695 |
Tip
support optional (EXCLUDED) |
|
6,5m
[21' 4''] |
EX1909/057 |
S |
$11,875 |
Needs
a tip support (INCLUDED) |
|
7m
[23'] |
EX1909/049 |
S |
$12,055 |
Needs
a tip support (INCLUDED) |
|
7,5m
[24' 7''] |
EX1909/055 |
S |
$12,235 |
Needs
a tip support (INCLUDED) |
|
8m
[26' 3''] |
EX1909/025 |
S |
$12,415 |
Needs
a tip support (INCLUDED) |
|
8,5m
[27' 11''] |
EX1909/026 |
S |
$12,595 |
Needs
a tip support (INCLUDED) |
|
9m
[29' 6''] |
EX1909/027 |
S |
$12,775 |
Needs
a tip support (INCLUDED) |
|
9,5m
[31' 2''] |
EX1909/028 |
S |
$12,955 |
Needs
a tip support (INCLUDED) |
|
10m
[33' 10''] |
EX1909/029 |
S |
$13,135 |
Needs
a tip support (INCLUDED) |
|
10,5m
[34' 6''] |
EX1909/030 |
S |
$13,315 |
Needs
a tip support (INCLUDED) |
|
11m
[36'] |
EX1909/031 |
S |
$13,495 |
Needs
a tip support (INCLUDED) |
|
11,5m
[37' 9''] |
EX1909/032 |
NS |
$13,675 |
Needs
a tip support (INCLUDED) |
|
12m
[39' 4''] |
EX1909/033 |
NS |
$13,855 |
Needs
a tip support (INCLUDED) |
|
12,5m
[41'] |
EX1909/034 |
NS |
$14,035 |
Needs
a tip support (INCLUDED) |
|
13m
[42' 6''] |
EX1909/035 |
NS |
$14,215 |
Needs
a tip support (INCLUDED) |
|
13,5m
[44' 4''] |
EX1909/036 |
NS |
$14,395 |
Needs
a tip support (INCLUDED) |
|
14m
[46'] |
EX1909/037 |
NS |
$14,575 |
Needs
a tip support (INCLUDED) |
|
|
OPTIONS FOR BL5 Series |
CODE |
Type |
|
COMMENTS |
|
ARMS |
|
|
|
|
|
|
|
|
BL52 RIGID ALUMINUM SKIRT (central arm) |
6 m
[19' 8''] |
E/BLOP/230 |
NS |
$1,509 |
|
|
|
6,5m
[21' 4''] |
E/BLOP/231 |
NS |
$1,546 |
|
|
|
7m
[23'] |
E/BLOP/232 |
NS |
$1,595 |
|
|
|
7,5m
[24' 7''] |
E/BLOP/233 |
NS |
$1,652 |
|
|
|
8m
[26' 3''] |
E/BLOP/234 |
NS |
$1,739 |
|
|
|
8,5m
[27' 11''] |
E/BLOP/235 |
NS |
$1,969 |
|
|
|
9m
[29' 6''] |
E/BLOP/236 |
NS |
$2,230 |
|
|
|
9,5m
[31' 2''] |
E/BLOP/237 |
NS |
$2,355 |
|
|
|
10m
[33' 10''] |
E/BLOP/238 |
NS |
$2,688 |
|
|
|
10,5m
[34' 6''] |
E/BLOP/239 |
NS |
$2,810 |
|
|
|
TIP SUPPORTS |
STANDARD |
E/BLOP/005 |
S |
$345 |
|
|
|
ELECTROMAGNETIC |
E/BLOP/006 |
S |
$883 |
|
|
|
FOLDING TIP SUPPORT FOR ARM > 5m [16'] |
E/BLOP/007 |
NS |
$385 |
|
|
|
OVAL ARM TIP SUPPORT (FOR BL33 OR BL53 ONLY) |
STANDARD |
E/BLOP/222 |
NS |
$390 |
|
|
|
ELECTROMAGNETIC |
E/BLOP/223 |
S |
$1,284 |
|
|
CONTROLS & ELECTRONICS |
|
|
|
|
|
|
|
REMOTE CONTROL |
TRANSMITTER 2 CHANNELS |
E/BLOP/133 |
S |
$90 |
|
|
|
RECEIVER 2 CHANNELS WITH TRANSMITTER |
E/BLOP/134 |
S |
$255 |
|
|
|
KEYSWITCH TO BLOCK GATE OPEN |
|
E/BLOP/103 |
S |
$150 |
|
|
|
PUSH BUTTONS BOX |
2
BUTTONS |
E/BLOP/136 |
NS |
$115 |
|
|
|
2
BUTTONS + SELECTOR |
E/BLOP/040 |
S |
$145 |
|
|
|
2
BUTTONS + KEY SWITCH |
E/BLOP/041 |
NS |
$185 |
|
|
|
3
BUTTONS |
E/BLOP/048 |
S |
$155 |
|
|
|
AS1321
BOARD |
ADDITIONNAL I/O (4 IN + 4 OUT) |
E/BLOP/129 |
S |
$369 |
|
|
|
CONFIGURATION AS1320 MASTER/SLAVE |
PROGRAMMING |
E/BLOP/153 |
S |
$175 |
|
|
SIGNALIZATION |
|
|
|
|
|
|
|
RED ARM LIGHT |
1 SET
OF LIGHTS |
E/BLOP/121 |
S |
$145 |
|
|
|
2 SET
OF LIGHTS |
E/BLOP/122 |
S |
$258 |
|
|
|
3 SET
OF LIGHTS |
E/BLOP/123 |
S |
$370 |
|
|
|
4 SET
OF LIGHTS |
E/BLOP/124 |
S |
$483 |
|
|
|
5 SET
OF LIGHTS |
E/BLOP/125 |
S |
$590 |
|
|
|
TRAFFIC
LIGHTS ON BARRIER |
RED/GREEN LIGHTS |
E/BLOP/138 |
NS |
$1,335 |
|
|
|
TRAFFIC
LIGHTS w/MOUNTING SUPPORT |
RED/GREEN LIGHTS |
E/BLOP/139 |
NS |
$1,445 |
|
|
|
STOP
TRAFFIC SIGN |
400 mm
[16''] DIAMETER |
E/BLOP/114 |
S |
$175 |
|
|
OTHERS |
|
|
|
|
|
|
|
HEATING |
FORCED
FAN HEATER (550W) |
E/BLOP/163 |
S |
$235 |
|
|
|
ANTI-CORROSION BASE FOR BL52/53 |
|
E/0172/168 |
NS |
$485 |
|
|
|
NON
STANDARD COLOUR (MINIMUM OF 6 GATES) |
|
E/BLOP/159 |
NS |
$625 |
|
|
|
