Liftmaster Slide Gate Hardware
V-Wheels   Roller Guides    Overhead Gate  Sprocket / Tracks

Liftmaster  V-Wheels
	VW202-1	4" UHMW V-Groove Wheel with Axle Bolt and Nut	$31.00
	VW201-1	4" Steel V-Groove Wheel only with Axle Bolt and Nut	$62.00
	VW201	4" Steel V-Groove Wheel with Mounting Side Plates	$69.00
	VW201-B	Bolt-on 4" Steel V-Wheel with Mounting Side Plates	$83.00
	VW400	4" Solid Steel Precision V-Groove Wheel	$69.00
	VW600	6" Solid Steel Precision V-Groove Wheel	$115.00
	VW204	Dual 6" Steel V-Groove Wheel Trolley Assembly	$306.00
	VW203	6" Steel V-Groove Wheel with Axle Bolt and Nut	$115.00
	VW202	4" UHMW V-Groove Wheel with Mounting Side Plates	$41.00
Liftmaster  Rollers
	GR121-RB	3" Guide Roller with Center Bolt and Nut - Black	$33.00
	GR121-RG	3" Guide Roller with Center Bolt and Nut - Gray	$33.00
	GR122-RB	6" Guide Roller with Center Bolt and Nut - Black	$37.00
	GR122-RG	6" Guide Roller with Center Bolt and Nut - Gray	$37.00
	GR123-RB	11" Guide Roller with Center Bolt and Nut - Black	$43.00
	GR123-RG	11" Guide Roller with Center Bolt and Nut - Gray	$43.00
	GR121-SB	3" Side Mount Guide Roller Assembly - Black	$48.00
	GR121-SG	3" Side Mount Guide Roller Assembly - Gray	$48.00
	GR122-SB	6" Side Mount Guide Roller Assembly - Black	$54.00
	GR122-SG	6" Side Mount Guide Roller Assembly - Gray	$54.00
	GR123-SB	11" Side Mount Guide Roller Assembly - Black	$67.00
	GR123-SG	11" Side Mount Guide Roller Assembly - Gray	$67.00
	GR121-EB	3" Extended Guide Roller Assembly - Black	$88.00
	GR121-EG	3" Extended Guide Roller Assembly - Gray	$88.00
	GR122-EB	6" Extended Guide Roller Assembly - Black	$132.00
	GR122-EG	6" Extended Guide Roller Assembly - Gray	$132.00
	GR123-EB	11" Extended Guide Roller Assembly - Black	$174.00
	GR123-EG	11" Extended Guide Roller Assembly - Gray	$174.00
	GR124B	3" Adjustable Guide Roller Assembly - Black	$116.00
	GR124G	3" Adjustable Guide Roller Assembly - Gray	$116.00
	GR125B	6" Adjustable Guide Roller Assembly - Black	$134.00
	GR125G	6" Adjustable Guide Roller Assembly - Gray	$134.00
Sprockets & Tracks
	ES130	End Sprocket with guard- #41 chain with 3/16" back plate, 1" shaft.	$123.00
	IS301	End Sprocket w/o guard- #41 chain with 3/16" back plate, 1" shaft.	$93.00
	TV 201	V- Steel Track 10 ft  1" X 1" X 1/8" angle with 4" plate, interlocking ends.	$121.00
	TM 202	V-Track Asphalt mounting plates- used to install TV210 track in asphalt	$20.00

TG100-For sliding gates that do not have enough space to open into completely. Allows the use of two gates that slide into almost 1/2 the normal area. Drive box assembly, End Sprockets, 20 ft. Chain Guide rollers

$88.00

Overhead Lift Gates
		JTA Series --Allows an overhead gate or door to be lifted as close as 1" to the ceiling when fully opened. 450 lbs capacity, weldable UHMW rollers, Works like a garage door only with gates. Includes: Right & Left power arm assemblies, tracks, rollers and parts for installation.
	JTA175-7	Jamb-Track Hardware Assembly for Gates 6 1/2' - 7 1/2' High	$770.00
	JTA175-8	Jamb-Track Hardware Assembly for Gates 7 1/2' - 8 1/2' High	$840.00
	JTA175-9	Jamb-Track Hardware Assembly for Gates 8 1/2' - 9 1/2' High	$940.00
	JTH175-7	Hardware Assembly for Gates 6 1/2' - 7 1/2' High, No Track	$710.00
	JTH175-8	Hardware Assembly for Gates 7 1/2' - 8 1/2' High, No Track	$770.00
	JTH175-9	Hardware Assembly for Gates 8 1/2' - 9 1/2' High, No Track	$880.00

Copyright © 2005-2009 Parking Systems Corp® All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronically without the prior written consent of Upswung Parking Systems Corp®.