|
Mechanical
- Dual V-belt drives
- Heavy-duty 75:1 right-angle oil
bath gear reduction
- Heavy-duty harmonic link with oil
impregnated bronze bushings
Electrical
- 1/2 HP, 115 VAC, single-phase,
thermally-protected, open-frame, resilient-mount PSC
motor
- Power on/off switch
- Duplex receptacle (115 VAC units
only)
- Three-button control station
included
- Accessory connections are 24-volt
AC or DC
- Easily adjustable cam-operated
limit switches
- Full system connections for
access controls and reversing devices
Options
- 230V, single-phase operation
- Powdercoated stainless steel
cabinet for installations in areas where high
concentration of corrosive material is present
- Thermostatically-controlled strip
heater
- Arm signal light
- 16-foot arm
- Constructed of 5/4 soft wood,
painted white with yellow and black warning tape and
labels on each side
Gate Arm:
- Heavy-duty wishbone style
- Available in lengths from 16 to
25 feet
- Constructed of 1x6" soft wood,
painted white with yellow and black warning tape and
warning labels on each side
- Includes appropriate
counterweight system
|
CAUTION
|
-
Automatic gates not for pedestrians
-
Automatic gate operators designed for
vehicular traffic only; operators are
powerful and can cause serious injury or
death; DIRECT ALL PEDESTRIAN TRAFFIC TO
SEPARATE PEDESTRIAN GATE
-
UL 325 requires use of contact or
non-contact anti-entrapment devices
-
ASTM F2200 requires that all exposed rollers
are covered
|
|
Model SG Security Gate
with Wishbone Arm
The Model SG barrier gate
is designed to control industrial vehicular traffic. The
gate can be actuated by different devices, such as radio
controls, single- and three-button control stations,
digital keypads, coded cards, sensing loops and
telephone entry systems.
The Model SG barrier gate can be used for large
industrial vehicular traffic. For high-use applications
on wide driveways, it is recommended to use two model
BGU 12, one on each side of the driveway.
The Model SG barrier gate control system is designed to
accept most available entrapment devices and has
function switches that will allow for various methods of
control.
Cabinet
-
Weather-resistant galvannealed steel cabinet with
powder coat finish
- Lockable and
removable front access panel for easy access
Warning Signals:
-
Pre-start audio/visual outputs
provided
Anti-Entrapment/Detection
Devices:
Control Circuit:
- Solid state
circuit board, 24-volt AC or DC
- Inherent current
sensing system
- 15 LEDs for easy
setup and troubleshooting
- Built-in maximum
run timer and auto close timer
- Master/Slave -
simple three-wire connection
Width: 15"
Height: 40 1/2"
Depth: 15 1/2"
Weight: 200 lbs.
|
